Description
Initial Drying: 10 to 90 seconds.
Complete Drying: 24 Hours.
- DOES NOT RUN OFFER VERTICAL SURFACES
- is not absorbed by porous surfaces
- Thixotropic Properties and High Viscosity.
Glue 21 Gel is ideal for bonding leather :
- metal
- rubber
- Wood
- ceramic
- cement
- hard plastic
- glass
- Leather
- plywood
Except PE, PP and PTFE (Teflon)
Shear Strength : 3.5 MPA.
Irregularities up to 0.25 mm
Resistant to temperatures from -55 ° C to 80 ° C.
Density: 1.1 g/cm³.
Instructions for use : The Surfacces to Be Bonded Must Be Clean, Free of Grease and Dirt (for this purposes you can use the degreasers P-102 or P-959). APPRY A THIN, Even Layer of Adhesive to Surface. The Thinner The Layer, The Stronger The Connection. IMMOSIELY assembles The PARTS, Press and HOLD FOR A FEW Seconds.