How to Repair an Inflatable Pool Float and Extend the Water Fun Season ☀️
Summer is in full swing, bringing with it the joys of swimming and relaxing in the sun!
🏊♀️ But there’s nothing more frustrating than an inflatable pool float that starts to deflate.
A small puncture can quickly turn your relaxing moment into a headache.
Fortunately, repairing an inflatable is not that difficult — and with the right products, your favorite pool accessory will be back in shape and ready to use.
Discover how to extend the life of your inflatable equipment with an effective and long-lasting repair. 💪
How to Repair an Inflatable Pool Float?
Step 1: Locate the Leak 🕵️♀️
Before any repair, it’s essential to identify the exact location of the leak. Here are a few tips to help you:
-
Listen carefully: If the leak is significant, you might hear a hissing sound from the hole. 👂
-
Submersion test: Submerge the float (or the deflated area) in a basin of water.
Air bubbles 🫧 will reveal the leak. -
Soapy water: Mix water with liquid soap and apply it to the surface of the float. Bubbles will form where the air escapes. 🧼
Once you’ve found the leak, mark it with a pen or marker so you don’t lose track. 🖊️
Step 2: Prepare the Surface ✨
Proper surface preparation is key to a durable repair.
-
Clean the area around the hole thoroughly with water and soap. Remove any dirt, grease, or residue. 🚿
-
Let it dry completely. A wet surface would weaken the glue’s adhesion. ☀️
-
Cut a patch: Use an inflatable repair kit or cut a piece of soft plastic (from an old float or broken inflatable toy) slightly larger than the hole. Round off the edges to prevent peeling. ✂️
Step 3: Apply Primer for Maximum Adhesion 🛡️
The surface of an inflatable float is smooth and non-porous, which can make gluing tricky.
For optimal adhesion and a nearly invisible repair, we strongly recommend using a Primer.
Primer 21 30ml by Colle21 is specially designed to improve glue bonding on difficult plastics.
-
Apply a thin layer of Primer 21 to the cleaned and dried surface of the float, as well as on the patch.
-
Let it dry according to the product’s instructions.
This product works by chemically preparing the plastic surface, creating the perfect base for the adhesive. 🔬
Step 4: Repair with a Flexible and Resistant Glue 💪
Now that the surface is ready, it's time to apply the patch.
For inflatable floats, flexibility and water resistance are crucial. This is where Colle Flex 21 comes in — a flexible and elastic glue designed for durable repairs on materials exposed to stress and moisture.
-
Apply a thin and even layer of Colle Flex 21 to the patch. 🩹
-
Position the patch: Press it firmly onto the leak, making sure it’s centered.
-
Apply pressure: Hold or press firmly for a few minutes. You can use a heavy object or clamp if the shape allows. ⏱️
-
Drying time: Let the glue dry for at least 24 hours (or follow product instructions).
Thanks to its waterproof and UV-resistant properties, Colle Flex 21 is ideal for outdoor use. ☀️💧
Step 5: Check the Repair ✅
Once dry, reinflate the float and test the repair by placing it back in soapy water or a basin. If no bubbles appear, your float is ready for more fun! 🎉
By following these steps and using high-quality products like Primer 21 and Colle Flex 21 by Colle21, you can easily repair your inflatable pool floats and extend their lifespan.
Don’t let a small hole ruin your summer fun! 🏖️
🔗 Follow us on social media!
📸 Instagram
🎥 TikTok
📘 Facebook
▶️ YouTube
🎯 Let’s stay bonded with Colle21! 🚀